To Next PageTo Next Page
Need help?Do you have a question about the Alliance Laundry Systems UT050E and is the answer not in the manual?
General| Brand | Alliance Laundry Systems |
|---|---|
| Model | UT050E |
| Category | Dryer |
| Language | English |
Explains DANGER, WARNING, CAUTION, IMPORTANT, and NOTE statements in the manual.
Basic precautions for reducing fire, shock, injury, or death risks when using the dryer.
Information applicable to specific models, referring to the serial plate for model number.
Details on finding the serial plate on the machine for model identification.
Details about the control, power failure, IR, USB, network, audit, and error status indicators.
Description of the nine keypads and their functions for machine operation.
Overview of various operating modes like Power-Up, Start, Run, Pause, and error modes.
How machine cycles execute step-by-step based on cycle type and programmed settings.
Explains Time Dry, Auto Dry, and Moisture Dry cycle types and their operation.
Procedure for selecting and starting a machine cycle from the Cycle Selection Menu.
Details Cycle Options, Cycle Info, and Close Door Menus for managing cycle selection.
Displays current cycle name, status, temperature, and remaining time during operation.
Introduces charts for navigating the display menus and understanding the system structure.
Outlines accessing System Menu options like Rapid Advance, Globals, Diagnostics, and Reset.
Describes how to access other menus such as Passcode, Audit Data, Service Schedule, Advanced Info, Modify Cycle, Globals, Diagnostics, and Reset.
Instructions on how to open the service door for stacked and stand-alone tumble dryers.
Entry point to access various control functions like Rapid Advance, Globals, and Diagnostics.
Process for confirming or discarding programming changes made in menus.
Displays general information and status of a running cycle.
Allows viewing programmed values for a cycle while it is running.
Procedures for modifying cycle parameters like temperature and moisture while the cycle is running.
Shows the current state of control inputs and outputs.
Enables manual programming and modification of existing or new machine cycles.
Step-by-step guide for modifying or copying existing cycles.
Table detailing parameters for Time Dry, Cool Down, Reversing, Auto Dry, and Moisture Dry cycles.
Options for setting language, banners, audio signals, and cycle signals.
Configuration for duration, errors, cool down, temperatures, and real-time clock settings.
Settings for daylight saving, date/time formats, and display options.
Settings for advanced features, indicators, and power save options.
Instructions on how to read machine performance audit data via keypads.
Displays machine model, serial number, type, and software versions.
Lists recent errors, error audit counts, and provides error code information.
Allows monitoring control inputs and manipulating machine outputs.
Procedures for running diagnostic test cycles to verify machine functions.
Detailed manual diagnostic tests to check specific machine components and functions.
Tests for dryer temperature and various voltage supplies (12.5VDC, 24VDC, AC Mains).
Tests to verify machine configuration settings and communication interfaces.
Further tests for machine configuration values related to capacity and type.
Tests for machine configuration related to heat type and voltage supply.
Tests for ICM Alarm Status, Heat Interlock, and Air Flow Switch functionality.
Tests for various thermostats and motor operations (Fan, Damper, Motor).
Procedures for testing the moisture sensor system's accuracy.
Information on resolving heat-related errors, including ICM issues.
Describes errors related to cabinet and stove limit thermostats.
Troubleshooting for air flow switch malfunctions and ICM communication issues.
Identifies and addresses errors related to fan and drive motors.
Details errors involving communication between boards and thermistor readings.
Covers SCI, Network, Machine ID Chip, and IR communication errors.
Addresses Board Not Ready, Brownout, Break-In Alarm, and Board ID errors.
Provides specific error codes and corrective actions for fan and drive motor issues.
Continues detailing motor error codes and their causes/corrections.
Lists error codes and solutions for shorted outputs, ICM, and output board errors.
Outlines daily service reminders and inspection points for the machine.
Instructions for resetting cycles or global programming parameters to factory defaults.
Table of moisture sensing cycles, including type, material, temperature, and target moisture.
Table of non-moisture sensing cycles, detailing type, material, temperature, and dryness level.
