What to do if Alliance Laundry Systems Dryer control is in lockout mode?
If the control is in lockout mode, a manual reset is needed. You can reset it by pushing the red lockout button or using the front end control.
What to do if Alliance Laundry Systems Dryer has valve on, but no spark during TFI?
Several issues could be the cause: * A shorted electrode. * The spark gap might not be correct. If so, set it to .094-.156 inch. * The high voltage cable might be faulty or have a poor connection. * A control failure.
General| Brand | Alliance Laundry Systems |
|---|---|
| Model | UT170N |
| Category | Dryer |
| Language | English |
To Next Page