Alliance Laundry Systems UWL045T3V - Nameplate Location; Replacement Parts; Customer Service

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Introduction
F8434101
10
Nameplate Location
The nameplate is located on the back of the machine
and is programmed in the UniLinc Control. To access
Machine ID through the control:
1. Press and hold , then , then
keypads at the same time.
2. Press the keypad until Diagnostic is
highlighted.
3. Press the keypad.
4. Press the keypad until Machine ID is
highlighted.
5. Press the keypad.
Always provide the machine’s serial number and
model number when ordering parts or when seeking
technical assistance. Refer to Figure 1.
Figure 1
Replacement Parts
If literature or replacement parts are required, contact
the source from which the machine was purchased or
contact Alliance Laundry Systems LLC at
+1 920) 748-3950 for the name of the nearest
authorized parts distributor. A parts manual may be
ordered by returning the reply card provided with each
machine.
Customer Service
For technical assistance, contact your local distributor
or call:
Alliance Laundry Systems
Shepard Street
P. O. Box 9 90
Ripon, WI 54971-0990
U.S.A.
www.comlaundry.com
Phone: +1 (920) 748-3121
Ripon, Wisconsin
Alliance International
+3256412054
Wevelgem, Belgium
PHM847N
1 In UniLinc Control
2 At back of machine
PHM847N
2
1
EXAMPLE OF MACHINE NAMEPLATE LOCATION