Alliance Laundry Systems UWL045T3V - Diagnostic; Diagnostic Menu

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Diagnostic
49
F8434101
Test Cycle
STEP Test Cycle Step
Displayed
Description
STEP ADVANCE COMMENTS
1
Keypad Test Step FEC and Output Board S/W
versions and “Press Each
Keypad To Advance”
Advance after all keypads
depressed.
2
Door and Lock
Test Step
“Door and Lock Status”
3
Display Test Step “Press Any Keypad To
Advance Through Screen
Test”
Keypress
4
Display Test Step #1 Screen is blank Keypress
5
Display Test Step #2 Horizontal Bars Keypress
6
Display Test Step #3 Horizontal Bars (inverted) Keypress
7
Display Test Step #4 Screen is gray Keypress
8
Hot Fill to Low Level “Hot Fill To Low” Keypress All outputs turned off when
Low Level reached
9
Cold Fill to Low Level “Cold Fill To Low” Keypress All outputs turned off when
Low Level reached
10
Warm Fill to Low Level “Warm Fill To Low” Keypress when Low
Level is reached
All outputs turned off when
Low Level reached
11
Warm Fill to High Level “Warm Fill to High” Keypress when High
Level is reached
All outputs turned off when
High Level reached
12
External Supply #1
Wash Speed Agitate
“External Supply #1” Keypress
13
External Supply #2
Wash Speed Agitate
“External Supply #2” Keypress
14
External Supply #3
Wash Speed Agitate
“External Supply #3” Keypress
15
External Supply #4
Wash Speed Agitate
“External Supply #4” Keypress
16
External Supply #5
Wash Speed Agitate
“External Supply #5” Keypress
17
External Supply #6
Wash Speed Agitate
“External Supply #6” Keypress
18
External Supply #7
Wash Speed Agitate
“External Supply #7” Keypress
19
External Supply #8
Wash Speed Agitate
“External Supply #8” Keypress
20
Int Supply #1
Wash Speed Agitate
“Internal Supply #1” Keypress or
30 seconds
21
Int Supply #2
Wash Speed Agitate
“Internal Supply #2” Keypress or
30 seconds
Table 4 (Continued)