20 806221
General Troubleshooting
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the washer before servicing.
• Never start the washer with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the washer is properly grounded.
• Motor not grounded! Disconnect electric power before servicing motor.
W485
WARNING
9. Excessive Vibration and/or Noise During Spin
FLW1809S
Excessive Vibration and/or Noise During Spin
Is
the load of proper
size?
Add or remove items as needed to ensure load size is correct.
No
Does
the wash load
contain the proper
mix of laundry
items?
Yes
Add or remove items as needed to ensure proper mix of
items (e.g. do not wash towels and sheets together).
No
Is
machine
level?
Yes
Level machine properly.
Refer to Installation Instructions.
No
Yes
Are
all panels on
machine?
Replace all panels.
No
Yes
Are
the front and rear
bearings making
excessive
noise?
Replace the bearings as needed.
Yes
Lift up on
the basket at the
front of the tub. Is there any
up and down play that would
indicate bearing
wear?
No
Replace the bearings as needed.
Yes
Are
motor and drive
pulleys aligned and
on tight?
Align/tighten pulleys as needed.
No
To Next Page
Loading...