ALLIANCE STEBXASP434AW12 User Manual

Dryer Motor Does Not Run
Is power cord plugged
in?
Is electrical power
off or fuse blown?
Check laundry room
for blown or loose
fuse(s), or open
circuit breaker(s).
The dryer itself
doesn't have an
electrical fuse.
Yes
Plug in cord.
No
Is loading door
closed?
No
Turn power on or
replace fuse. Check
both fuses for
electric models.
Yes
Is door switch
inoperative?
Yes
Close door.
No
Is start switch
inoperative?
No
Test switch and
replace if
inoperative.
Yes
Are motor starting
functions
inoperative, does not
start, or motor just
hum?
No
Test switch and
replace if
inoperative.
Yes
Is motor dead, won't
run?
No
Refer to Adjustments
section to check
motor switch and
motor windings.
Yes
Has motor overload
protector cycled?
No
Refer to Adjustments
section to check
motor switch, motor
windings and main
windings.
Yes
Is motor centrifugal
switch sticky or
plugged with lint?
No
Wait two or three
minutes for overload
protector to reset.
If protector cycles
repeatedly, refer to
next flowchart.
Yes
Is there a bind in
motor bearing?
No
Remove dust or lint
and spray with a
cleaner and lubricant.
Yes
Remove belt and
determine if motor
shaft will spin.
Replace motor if
shaft is locked up.
Yes
Continued on
next page
Dryer Troubleshooting
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
14 Part No. D515519R3

ALLIANCE STEBXASP434AW12 Specifications

General

Brand	ALLIANCE
Model	STEBXASP434AW12
Category	Dryer
Language	English