ALLIANCE STENXASP543DN01 - Igniter Does Not Glow (Gas Supply Sufficient) - Gas Dryer Models

Igniter Does Not Glow (Gas Supply Sufficient) - Gas Dryer Models
Is there power to
power leads on valve
(pink and blue
wires)? On gas coils?
Has flame sensor
failed with contacts
open?
Yes
Check selector
switch, thermostats,
motor switch and
wiring.
No
Is igniter broken or
Ohms open?
No
Replace sensor.
Yes
Replace igniter.
Yes
Dryer Troubleshooting
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
23 Part No. D515519R3