ALLIANCE T30 Series User Manual

24 70291301
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Troubleshooting
10.Tumble Dryer Overheating
Tumbler
Overheating
Does
tumbler
have incorrect
main burner
orifices?
No
Is gas
pressure too high or
low?
Is the
make-up air
inadequate?
No
Obtain and install
correct orifices.
Ye s
Adjust gas pressure
as specified on
serial plate.
Ye s
Refer to Installation
Manual for make-up
air requirements.
Ye s
Is there
lint buildup?
Ye s
Clean lint
compartment. Check
damper for lint
accumulation. Check
ductwork for lint
buildup.
Is the
exhaust system
restricted or
inadequate?
Ye s
Remove obstruction
or lint build up from
exhaust ductwork.
Refer to Installation
Manual for exhaust
system
requirements.
No
Is the
control heater
relay
malfunctioning?
No
Check wiring to
ensure thermistor
is connected.
Replace
thermistor if
necessary.
Remove lint build-
up on thermistor.
Ye s
Adjust damper
so it turns
freely.
Ye s
Replace control.
Ye s
Are
the safety covers
missing, allowing
cool air to enter
tumbler?
Ye s
Replace covers.
Is the
lint screen
clogged with
fabric
softener?
Ye s
Replace lint
screen.
Is the
exhaust
damper
binding?
Is the
thermistor
sensor
inoperative?
No
No
No
TMB1911S
No
No
Are there
holes in cabinets
due to foreign
objects?
Ye s
Repair/replace
cabinet
components.
No

ALLIANCE T30 Series Specifications

General

Brand	ALLIANCE
Model	T30 Series
Category	Dryer
Language	English