AT-GS950/48 Gigabit Ethernet Smart Switch Installation Guide
33
Installing the Switch on a Desktop
You can place the AT-GS950/48 Gigabit Ethernet Smart switch on a
desktop or install it in a 19-inch rack. To install the switch in a rack, refer to
“Installing the Switch in a Rack” on page 34.
To place the switch on a desktop, perform the following procedure:
1. Remove all equipment from the package and store the packaging
material in a safe place.
2. Turn the switch over and attach the four rubber feet to the bottom of
the switch as shown in Figure 6.
Figure 6. Attaching the Rubber Feet
3. Turn the switch over again and place it on a flat, secure surface (such
as a desk or table) leaving ample space around the unit for ventilation.
1079
1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45R 47R
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46R 48R
45 46 47 48
POWER
CLASS 1
LASER PRODUCT
AT-GS950/48
48 Port 10/100/1000 Mbps WebSmart Switch with 4 Combo SFP Ports
LINK
1000M
ACT
100M 10M
PORT ACTIVITY
SFP
To Next Page
Loading...
