environment for existing Wi-Fi access points and display the search results. To easily take over the
data of your Wi-Fi, press the "Select" button in the corresponding line. All data, with the exception of
the cipher key, is taken over.
The automatic adoption of the parameters SSID, KANAL and WLAN AUTH MODE takes place by
pressing the button "Select". The parameter "CHIFFRIERSCHLÜSSEL" must always be entered
manually and must be identical to its already active WLAN. Alternatively, you can manually set your
access data for your private wireless network.
• SSID
Entry must be identical to your WLAN. • WLAN AUTH MODE Choose the encryption method
identical to your WLAN (OPEN NONE, Shared WEB, WPAPSK-TKIP, WPAPSK-AES, WPA2PSK-TKIP,
WPA2PSK-AES). We recommend using WPA2PSK-AES for high security.
• CHIFFRIERSCHLÜSSEL
Entry must be identical to your Wi-Fi. "Show PASSWORD" can be used to visually check whether a
typing error has crept in. After changing parameters with "Enter Save". The MSR device
automatically restarts. Now disconnect the device from your LAN connection. A simultaneous
connection of Wi-Fi and LAN leads to malfunctions in your network. After about 90 seconds, the
ALL3697 should be accessible via WLAN with the new parameters.
To Next Page
Loading...