Action tab
• Actors All already created actuators can be selected.
• Actor action Select between: On / Off / Toggle.
• Script to start Optionally, there must be a Linux shell script on the device, which is started by this
call. This function is intended for experts only.
• Execute only once If this function is activated, the action is executed exactly once when the
threshold value is reached. If the switch is deactivated, the action is executed continuously (usually
10 times per second). If only one email is sent, "Activated" must be set.
• Action break (seconds) Default = 1 second. For this time, the switching rule is ignored after
triggering before it is reactivated again. It is important to choose a reasonable time here for the
intended continuous sending of warning emails.
To Next Page
Loading...