• Number of pages for the display of tiles The display of the sensors / actuators can be divided
into several pages. When setting for several pages, an additional tab "page names" is displayed.
• Number of columns for the display of tiles The display of the sensors/actors is divided into the
specified number of adjacent tiles.
• Standard tab when loading This setting defines which page should be displayed when loading
the web site.
• Show weather widget Weather widget display.
• Color for condition "AUS" Set the background color of the switches when switched off.
• Color for condition "EIN-EIN-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-
Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-
Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-Ein-
Ein-Ein-Ein-Ein-Ein-Ein-Ein Set the background color of the switches when switched on.
• Condition of the start after restart Set the default state of digital actuators/outputs. You can
choose between "On", "Off" and "Last State". The setting applies to all digital actuators/outputs.
• state of analogue output after restart Set the default value of analog actuators/outputs. You
can choose between "Set value" (set value in the Set value field), "Off" and "Last state". The setting
applies to all analog outputs.
• Tile color change on/off Activate this option if you want the tile color of all digital actuators and
sensors to change depending on the condition.
• Tile color Condition 'From' Set the desired color with the color selector.
• Tile color Condition 'One' Set the desired color with the color selector.
• Change color when over / underrun Activate this option if you want the tile color of all analog
sensors to change depending on defined threshold values. The threshold value definition takes place
with the respective sensors.
• Tile color Condition 'Normal' Set the desired color with the color selector.
• Tile color Condition 'Min' Set the desired color with the color selector.
• Tile color Condition 'Max' Set the desired color with the color selector.
• Text for condition 0 Text to be displayed on digital sensors (inputs) in state 0.
• Text for Condition 1 Text to be displayed on digital sensors (inputs) in state 1.
• Assign a text to condition 0/1 Activate this option if you want all digital sensors (inputs) to
change the text depending on the state.
• Step size for double width Global setting for font size, which should be used for sensors (inputs)
with double tile width. Default value: 55.
• Step size for simple width Global setting for font size, which should be used for sensors (inputs)
with double tile width. Default value: 33.
To Next Page
Loading...