Allworx Server - Accessing an Outside Line

Allworx Server User Guide Version 7.6
1-866-ALLWORX * 585-421-3850 Page 9
wwww.allworx.com
Revised: 11/25/13
5. Press 0 - 7: Choose the default or preferred Presence greeting.
6. Press 4: To prevent callers from leaving messages.
1.2.5 Accessing an Outside Line
The Allworx Server Administrator can give configure the permission to access outside
lines from within the Audio Message Center. Users can dial external calls by pressing 7
from within from the main Audio Message Center menu. This enables users to dial calls
from off-site locations using the company’s outside lines and Caller ID.
Press 7 to hear a dial tone from which users can directly dial external phone numbers.
Users do NOT need to dial 9† or 78†+PIN before the phone number.
After connecting to an external call and the external party hangs up, users hear a dial
tone to place additional calls.
To disconnect (hang up) the call and return to the dial tone, press *#.
To return to the Audio Message Center main menu from the dial tone, press * # and re-
enter the Audio Message Center PIN followed by #.
Key Feature
0 Default
1 In Office
2At A Meeting
3 On Vacation
4 On Business Trip
5At Home
6Away
7Busy
# Return to previous menu
* Listen to these choices again
Note:
The ability to hang up a call and return to a dial tone using *# is not available for certain
combinations of originating phones and outside lines. See the Allworx Server
Administrator for more information.