ALMAC MULTI-LOADER 6.0 - Page 42

PAGE 42 ALMAC s.r.l.
No.
Identification
Function and Status
Description of the function
with a minimum height of
0.93m (ELC) 1.45 (EVO – BI-
ENERGY).
5
Button
(AUTOMATIC
LEVELLING)
Automatic levelling
Automatic levelling of the
machine on all the axes.
Engine glow plugs
preheating (EVO – BI-
ENERGY)
Activate glow plug preheating
Note: With the machine on,
the button works exclusively
for automatic leveling
6
Selector
DRIVING MODE SELECTOR
Position
DRIVE MODE
Standard operation - traction
FORWARD/REVERSE enabled
using 2 joysticks.
DC-S position
Simultaneous movement
FORWARD/REVERSE of the
tracks with the RH joystick
only (10).
ED-S position
Easy Drive System assisted
drive control system.
7
LED light
(green and
red)
Lights relating to the
operating status and
battery of the radio
control
Refer to the radio control
manual.
8
Selector
DYNAMIC LEVEL SELECTION
DYNAMIC LEVELLING ON
position
Dynamic levelling activation
during translation.
DYNAMIC LEVELLING OFF
position
Non-active dynamic levelling
during translation.
9
LH joystick
Left track FORWARD/REVERSE
travel control.
10
RH joystick
Right track
FORWARD/REVERSE travel
control.
11
Safety key
(KEY)
Safety key for console
activation
Insert the supplied key to
activate the console;
If the key is not inserted, the
console cannot be activated;
The key is encrypted so use
only the key provided,
otherwise the console cannot
be used.
12
Selector
Left rod manual levelling.