PAGE 45 ALMAC s.r.l.
It is possible to check the correct operation of the battery chargers by means of
the warning lights located on the front right side of the machine.
1. Lights on: Both 20Ah chargers work in series (40Ah total)
2. Light 1 on: Only a 20AH battery charger is in operation
3. Lights off: The chargers are not in operation
3.4 Operating safety devices
Attention: Periodically verify that the safety devices are operating correctly.
During work, the operator must be able to assess, recognise and avoid all
dangers and must immediately inform the persons in charge of any faults in the
safety devices so that they can be inspected and restored to their original
conditions of safety and reliability.
DO NOT TAMPER WITH AND DO NOT CHANGE THE CALIBRATION OF ANY OF
THE COMPONENTS OF THE ELECTRICAL AND HYDRAULIC SYSTEM.
The machine includes a complete set of safety devices.
To Next Page
Loading...
