ALMAC MULTI-LOADER 6.0 - Page 75

PAGE 75 ALMAC s.r.l.
KEY
A. Whenever the machine is
used
D. monthly or every 100 hours
G. annually or every 1500 hours
B. Daily or every 10 hours
E. every two months or every
250 hours
H. after long periods of inactivity (30 days)
C. Weekly or every 50 hours
F. quarterly or every 500
hours
* Refer to the engine use and maintenance
manual
Attention: All maintenance operations must be performed as indicated in
Chapter 2 Information regarding safety. In particular, maintenance must only be
carried out after the emergency push-button has been pressed, the engine
turned off and using individual protective equipment.
Attention: Disconnect the machine from all power sources.
Attention: It is mandatory to perform all the machine movements necessary for
checks/maintenance.
Note: Use of spurious spare parts, or parts that have not been approved by the
manufacturer voids the warranty and relieves ALMAC S.r.l. from all liability.
Note: Modifications or variations to the machine are forbidden unless authorised
by the manufacturer.
Note: All maintenance work that is not described in this manual must be
authorised by the manufacturer and must be performed by authorised
technicians.
Attention: Do not use the machine if one of its mechanical or hydraulic elements
or a control or safety device is faulty. Immediately notify Almac S.r.l.