HP 5 OPERATOR’S MANUAL
INTRODUCTION
Read this manual carefully to familiarize yourself with all aspects of operation and service of your
machine. It is important that all operators are properly trained. This manual contains safety
information that can prevent personal injury or equipment damage.
Keep this manual for reference, service, and resale. It should remain with the machine at all times.
A storage compartment for manuals has been provided behind the operator’s seat on the engine
compartment.
Machine orientation for left-hand, right-hand, front, and rear in descriptions and drawings is
determined as if you are sitting in the operator’s seat.
Record keeping is an important part of machine operation. A Combine Component Data Sheet
has been provided to keep track of options, features, and part numbers specific to your combine.
This information will help when ordering replacement parts and identifying your combine during
service calls. A Maintenance Schedule and a Daily Maintenance Checklist are also provided to
make sure the recommended service is performed. Following these recommendations will extend
the life of your combine and reduce costly down time and repairs.
All specifications, diagrams, and drawings in this manual are based on the latest information at
printing time. ALMACO reserves the right to make changes at any time without notice.
Please contact an ALMACO representative if you have any questions regarding:
- Material in this manual
- Function and operation of the plot combine
- Repair, maintenance, service, or other topics
ALMACO
99 M Ave. PO Box 296
Nevada, IA 50201-1549
USA
Phone: (515) 382-3506
Fax: (515) 382-2973
Beeper: (515) 239-0642
Web Page: www.almaco.com
E-Mail:
service@almaco.com
eng@almaco.com
sales@almaco.com
A-8 FORWARD
To Next Page
Loading...