HP 5 OPERATOR’S MANUAL
SAFETY B-7
STAY CLEAR OF HEADER
Rotating knives, gathering belts, conveyo
belts of row crop head, etc., cannot be
completely shielded due to their function.
Stay clear of these moving parts during
operation.
lways disengage header drive, shut of
engine, and remove key before servicing o
unclogging header.
STAY CLEAR OF AUGER
The auger located inside the grain tank
cannot be completely shielded against
accidental contact. Use a rod to clea
blockages. Never use hands or feet to clea
blockages or take samples. Never ente
grain tank while engine is running.
PARKING AND LEAVING THE COMBINE
Stop all drives, lower header, and set
parking brake before shutting off machine.
Shut off engine and remove key before
leaving operator platform. Never leave the
operator platform with the engine running.
Never leave the combine unattended with
the engine still running.
TRANSPORTING EQUIPMENT
Make sure all equipment is in the
travel/transport position.
Fold or stow components so equipment is
within legal travel height and width to avoid
damage to equipment and/or severe
electrical shock to the operator.
To Next Page
Loading...