HP 5 OPERATOR’S MANUAL
SPECIFICATIONS
FLUID AND CAPACITIES
Engine Oil: 15W-40 class CC/SE or CD/SE Engine Capacity (w/filter): 7 qt (6.5L)
Hydraulic Oil: Dexron III or compatible Hydraulic Tank Capacity: 11 gal (38L)
Fuel: Diesel (sulfur content less than 5%) Fuel Tank Capacity: 11 gallon (42L)
ENGINE
Engine: Deutz F3L2011 Horsepower: 36.2 @ 2800 rpm
ELECTRICAL
Battery: 12 Volt DC Ground: Negative
TIRES
Front: 26 x 12.0 –12 Rear: 23 x 10.5 -12
BASE MACHINE DIMENSION:
Length: 9’-9” (3m) Width: 4’-2” (1.25m)
Height: 9'-6" Ground Clearance: 10" (.25m)
Gross Weight: 2850 lbs. (1300kg)
STEERING:
Type: Hydrostatic with manual over-ride Turning radius: 5' 4"
HYDRAULIC DRIVE:
Forward/Reverse: Hydraulic Transmission Ground speed: 0-5 m.p.h.
Tank Capacity: 8 U.S. Gallons Oil Type: ATF (Type F) - 1993 or before
Dexron III - 1994 or after
CYLINDER
Type: Metal Raspbar Number of bars: 8
Diameter: 13" Width: 18"
Speed: 450 - 1300 rpm Control: Manual Variable Speed
STRAWPULLER
Diameter: 7" Number of blades: 4
Speed: 250 rpm
SHAKER PAN
Stroke length 3"
Strokes Per Minute 250 S.P.M
SPECIFICATIONS G-3
To Next Page
Loading...