Alarm 2, direct action
Alarm 2, reverse action
Logical OR Alarms 1 & 2
direct action
Output 1 Direction.
Determines
how NPN
Output 1 and
Relay 1 operate
Logical OR Alarms 1 & 2
reverse action
User adjustable
setting
None
0 – 5V
1 – 5V
0 – 10V
2 – 10V
0 – 20mA
Re-transmission (Linear) Output
Selects the output range.
NOTE; The hygrometer is factory set to
give either voltage or current outputs.
See the specification sheet and your
order for your hygrometer setting.
4 – 20mA
User adjustable
setting
None/Disabled
Comms. Enabled
Not available
Communications Enable/Disable
Only disable this function if comms. is
giving you a problem.
Not available
User adjustable
setting
Seconds
Minutes
Totaliser Timebase.
Hours
User adjustable
setting
dewTEC DS2000 User’s Manual Page 17
To Next Page
Loading...
