Alpha Radio Products
Product Release 1
List of Procedures
DOCNUMBER 9500
Document Issue 1, Revision 7
June 2009 v
List of Procedures
Procedure 4-1, “Prepare your station,” page 4–1
Procedure 5-1, “Unpack the amplifier and transformer,” page 5–1
Procedure 5-2, “Install the transformer,” page 5–3
Procedure 5-3, “Connect the transformer,” page 5–4
Procedure 5-4, “Connect the cables,” page 5–7
Procedure 5-5, “Set the input drive,” page 5–10
Procedure 5-6, “Connect the transceiver,” page 5–10
Procedure 6-1, “Operate the amplifier,” page 6–1
Procedure 6-2, “Tuning the amplifier,” page 6–6
Procedure 6-3, “Program the memory,” page 6–10
Procedure 7-1, “Set up to operate from a PC,” page 7–2
Procedure 8-1, “Clean the amplifier,” page 8–1
Procedure 8-2, “Retune the amplifier,” page 8–2
Procedure 8-3, “Replace the tube and fuses,” page 8–4
Procedure 8-4, “Upgrade firmware on the primary board,” page 8–5
Procedure 8-5, “Upgrade firmware on the secondary boards,” page 8–8
To Next Page
Loading...
