EasyManua.ls Logo

Alpine Spas K2 - Leaving the Spa Pool Long Term

Default Icon
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
74
8. SPA POOL CARE & MAINTENANCE
Theremaycomeatimewhenyouneedtoleavethespapoolforaperiodlonger
thanamonthandwanttoshutthespapooloff.Followthesestepstosafely
prepare the spa pool for hibernation:
1. See Previous Steps
Performsteps1and2from‘LeavingtheSpaPoolShortTerm’before
moving on.
2. Turn OFF Spa Pool
Completelyturnoffthespapoolatyourisolationswitchormainsboard.
3. Drain the Water
Drainthewateroutofthespapoolviatheexternaldrainvalve.
4. Drain pipes via Barrel Unions
Openupthecabinetssurroundingthespapoolandlocatethebarrelunions
atthecontrollerunit/heaterandthepumps.Loosen(stropwrenchmaybe
required)thebarrelunionseithersideofthecomponenttodrainexcesswater
fromthesurroundingpipes.Putdownatowelifrequired,tosoakupwater.
Tightentheunionsbackuponcenished.
5. Blowout Pipes (recommended if switching off for 6+ months)
Climbinsidethespapoolwitha‘Wet-Vac’.Removethejetpiecesandplace
thevacuumnozzleintothejetbodytosuckwaterdirectlyoutofthepipe.Not
everyjetpieceneedstobeattendedto,aimfor3-4perseat.Otherpipesto
suckwaterfromaretheinternaldrainvalveandthecirculationjetmounted
onthesideofthespapoolacrylic(usuallynearthetopsidecontrolpanel).
6. Wipe Down Spa Pool
Removeanyexcessbuildupofwaterfrominsidethespapoolandwipethe
acrylicshelldowncompletelywithamicrobreclothandmildall-purpose
anti-bacterial spray.
7. Secure Cover
Placethespapoolcoveronsecurelyandlockwithclips.Coverentirespapool
withatarpor‘spapoolwintercover’forthebestlong-termprotection.
TURNING OFF LONG TERM

Related product manuals