EasyManua.ls Logo

Alpine 1980 - Pre-Start Check; Pre-Start Check Points

Alpine 1980
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3. Replace container cap and shake
the container thoroughly.
4. Add the remainder of the gasoline.
5. Once again thoroughly agitate the
container. Then
using a funnel with
a fine mesh screen to prevent the
entry of water and foreign particles,
transfer mixture from container into
the snowmobile tank.
O
NOTE: When using pre-mixed
fuel, always shake the container
thoroughly as the oil has a tendency to
settle.
....
WARNING:
Never 'top up' gas
~
tank before placing the vehicle in
a warm area. At certain temperatures,
gasolinewill expand and overflow.
PRE-START CHECK
Check Points
Activate the throttle control lever
several
times to check that it operates easily
and smoothly. The throttle control lever
must return to idle position when re-
leased.
Check fuel level.
Check that the skis and tracks are
not
frozen to the ground or snow
surface and that the steering oper-
ates freely.
Activate the brake control lever and
make sure the brake fully applies be-
fore the brake control lever touches
the handlebar grip.
Verify that the path ahead of the ve-
hicle is clear of bystanders and
obstacles.
....
WARNING:
Only start your
~
snowmobile once all components
are checked and functioning properly.
9