Alpine 7525R - Page 17

Scan
1. Press the SCAN button @ (6) for 7524R) and the deck will play the first 10 seconds of
each selection. This feature is convenient when searching for a particular selection on
a tape.
2. Once you have located your desired selection, press the SCAN button @ again to
defeat this function.
Blank Skip
1. Press the B. SKIP button @ during playback to skip over any blank sections of tape
lasting 15 seconds or more.
2. To cancel the blank skip function, press the B. SKIP button @0 again.
Return Eject
1. Insert the cassette tape and begin playback.
2. Press the R. EJECT button 48 during one of the following modes and the cassette tape
will automatically eject when:
e Playback mode; After both sides A and B have been played.
e Fast Forward mode; After the other side has been played.
The R. EJ indicator 4) on that button will light.
3. To cancel the return eject mode, press the R. EJECT button 48 again.
Head Cleaning
When playback sound quality begins to deteriorate, it is time to clean the tape head.
Insert a special head cleaning cassette into the tape deck and allow it torun for _
approximately 1 minute to remove any foreign matter. There are special cleaning
cassettes that also clean the capstans and pinch rollers. Please contact your authorized
Alpine dealer for information about these cleaning devices.
17