Alpine 7525R - Page 18

@ CD OPERATION
The
following
instructions
apply
only
to
systems
that
incorporate
the
Alpine
CD
Shuttle
with
7525R/7524R.
Turn
the
unit
On
and
access
the
CD
mode
by
pressing
the
DISC
(
»/II
)
button
@.
Initial System Turn-On
When
operating
the
system
for
the
first
time
after
installation
or
after
the
vehicle's
battery
has
been
disconnected
and
reconnected,
press
the
Reset
switch
@
with
a
sharp
pencil
or
other
pointed
object.
Normal Play
1. Press the DISC ( »/HI) button @.
2. The first disc will begin playback.
3.
After
the
last
track
on
the
last
disc
is
played
back,
the
pickup
will
return
to
the
beginning
of
the
first
track
of
the
first
disc
and
begin
playback
from
that
point.
Pause
While
the
disc
is
playing,
press
the
DISC
(
»/II
)
button
@
to
temporarily
stop
playback.
The
dot
matrix
display
@
will
show
“PAU".
To
resume
playback,
press
the
DISC
button
(
P/IE)
@
again.
Music Sensor (Skip)
This
feature
allows
you
to
access
the
beginning
of
your
musical
track
selection
simply
and
quickly.
It
is
functional
in the
play
or
pause
mode.
The
dot
matrix
display
43 shows
the
track
number
you
have
selected.
To advance to the next track on the disc, press the UP/FF switch ®.
1. Playback stops, and the pickup moves up to the beginning of the next track. That
track number appears in the dot matrix display @.
2. Playback begins immediately.
3. If you wish to access a track further ahead on the disc, continue pressing and
releasing the UP/FF switch @ until you reach the track of your choice.
e Toreplay the track that is currently playing, press and release the DN/REW switch
1. Playback stops, and the pickup moves back to the beginning of the current track.
The track number in the dot matrix display 43 remains the same.
2. Playback begins immediately from the beginning of the track.
3. If you access a track further towards the beginning of the disc, continue pressing
and releasing the DN/REW switch © until you reach the track of your choice.
18