Alpine CDA-118M User Manual

11-EN
• Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
• The “ ” indicator lights up when a disc is inserted.
• Three-inch (8 cm) CDs cannot be used.
• WMA format files that are protected by DRM (Digital Rights
Management), AAC format files that have been purchased from
iTunes Store and files that are copy-protected (copyright protection)
cannot be played back on this unit.
• The track display for MP3/WMA/AAC data playback is the file
numbers recorded on the disc.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
• Press VIEW to switch the display. See “Changing the Display”
(page 12) for information about display switching.
Repeat Play
1 Press FUNC./SETUP.
2 Press /ENTER.
The repeat mode is activated.
3 Turn the Rotary encoder to select the Repeat
playback mode.
*
1
MP3/WMA/AAC mode only.
*
2
When an MP3 compatible CD changer is connected.
• If REPEAT DISC is set to ON during M I X ONE play in MP3
compatible CD changer mode, M.I.X. will apply to the current disc
only.
4 Press /ENTER.
5 Press FUNC./SETUP.
The track (file) will be played repeatedly.
• If no operation is performed for 60 seconds, the unit returns to
normal mode.
• To cancel, select OFF in the above procedure.
M.I.X. (Random Play)
1 Press FUNC./SETUP.
2 Turn the Rotary encoder to select M I X.
3 Press /ENTER.
The M.I.X. mode is activated.
4 Turn the Rotary encoder to select the
M I X playback mode.
*
1
MP3/WMA/AAC mode only.
*
2
When a CD changer equipped with the ALL M.I.X. function is
connected.
*
3
In the USB AUDIO mode, all files stored in the USB memory are
played back in random sequence, and the “ ” indicator lights up.
• When a song is played back during Random (M.I.X.) play in the USB
AUDIO mode, the song can be played back again randomly even if
not all songs on the USB Memory have been played back.
• If M I X ONE is set to ON during REPEAT DISC play in CD changer
mode, M.I.X. will apply to the current disc only.
5 Press /ENTER.
6 Press FUNC./SETUP.
The tracks (files) will be played back in random sequence.
• If no operation is performed for 60 seconds, the unit returns to
normal mode.
• To cancel, select OFF in the above procedure.
Searching for CD Text
On discs utilizing CD Text, songs can be searched and played by using
their recorded titles. For discs without CD Text, searches are made
using the track numbers associated with each song.
1 Press /ENTER during play.
This will set the search mode.
2 Turn the Rotary encoder to select the desired
track, and then press
/ ENTER.
This will play the selected track.
• Press in the search mode to cancel. Or, the search mode is
canceled if no operation is performed for 60 seconds.
• When CD Text Search is made during M.I.X. play, the M.I.X. play
mode will be canceled.
REPEAT ONE : Only a track/file is repeatedly played
back.
FOLDER *
1
: Only files in a folder are repeatedly
played back.
DISC *
2
: A disc is repeatedly played back.
OFF : Repeat mode is turned off.
M I X ONE : All tracks/files in a disc are
played back in random
sequence.
FOLDER *
1
: Only files in a folder are played
back in random sequence.
ALL *
2/
*
3
: All the tracks on all the CDs in
the current magazine will be
played back in random
sequence.
OFF : M.I.X. mode is turned off.

Alpine CDA-118M Specifications

General

MP3 playback	Yes
Audio formats supported	AAC, MP3, WMA
AM band range	530 - 1710 kHz
FM band range	87.7 - 107.9 MHz
Supported radio bands	AM, FM
Clock mode	12h/24h
Product color	Silver
Volume control	Rotary
Frequency range	5 - 20000 Hz
Disc types supported	CD, CD-R, CD-RW
Audio output channels	4.0 channels
Maximum power per channel	50 W
Signal-to-Noise Ratio (SNR)	105 dB
Display type	LCD
Display number of lines	2 lines
Bluetooth	No
USB version	2.0
USB ports quantity	1
File type	FAT 12, 16, 32
Number of optical discs	1 discs
Cables included	USB

Weight and Dimensions

Depth	187 mm
Height	51.5 mm