8
English
Basic Operation
1
Initial System Start-Up
Immediately after installing or applying power to
the unit, it should be initialized. To do this, first,
remove the detachable front panel. Behind the
front panel, to the right of the connector, is a
small hole. Using a pencil or other pointed
object, press the red Reset button mounted
behind this hole to complete the initialization
procedure.
1
1
MUTE
Turning Power On and Off
The unit can be turned on by pressing any
button except the eject ( h ) button or by
inserting a compact disc.
Press and hold the PWR button for at least 3
seconds to turn off the unit.
To Next Page
Loading...
