EasyManua.ls Logo

Alpine iLX-W650E - Setting the Brightness of the Backlighting; (Dimmer); Adjusting the Minimum Level of Backlight; Adjusting the Dimmer of Button Lighting at Night

Alpine iLX-W650E
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17-EN
Backlighting is provided by LEDs light built into the liquid crystal panel.
The illumination control adjusts the brightness of the backlighting based
on the car ambient lighting for easier viewing.
Setting item:
Dimmer
Setting contents:
Off, On, AUTO (Initial setting)
When “On” is set, the setting is also applied for the button lighting in
Adjusting the Dimmer of Button Lighting at Night” (page 17) and
Adjusting the Minimum Level of Backlight” (page 17).
You can adjust the brightness of the backlight. This function could be
used, for instance, to change the screen brightness while traveling at
night.
Setting item:
Dimmer Level
Setting contents:
-14 to 14 (Initial setting: 0)
This setting is only available when “Dimmer” is set to [On] or [AUTO].
You can adjust the brightness of the button lighting at night with the
dimmer.
Setting item:
Key illumination
Setting level:
-2 to 2 (Initial setting: 0)
This setting is only available when “Dimmer” is set to [On] or [AUTO].
Language Setup
[Lang uage] is selected on the System Setup Menu screen. The Setup
menu, feedback information, etc. for this unit can be changed to appear
in the selected language.
Setting item:
Language
Setting contents:
English, Français, Thai, Vietnamese
The currently selected language is displayed.
Reset
[Reset] is selected on the System Setup Menu screen. You can initialize
all data, to restore the factory settings. Remove the USB flash drive, etc.
from the system before operation.
Setting item:
Reset
1 To uc h [Reset].
2 After the confirmation message appears, touch [Yes].
The system starts initialization.
Do not turn on/off the power, change the ignition key position or
remove the screen panel until system restart is completed.
Setting the Brightness of the Backlighting
(Dimmer)
Off: Deactivate Auto Dimmer mode to keep the background
illumination of the monitor bright.
On: Keep the background illumination of the monitor dark.
AUTO: Adjust the brightness of the background illumination of
the monitor automatically to the brightness of the car
interior.
Adjusting the Minimum Level of Backlight
Adjusting the Dimmer of Button Lighting at
Night

Table of Contents

Related product manuals