71-EN
Operating the TUE-T200DVB (Optional)
Operable when optional TUE-T200DVB is connected.
When DVB-T is selected in “Setting the AUX Mode” (page 48), the
source is displayed in Source selection screen.
1
While your vehicle is parked, press SOURCE/ on
the unit.
The Source Select screen is displayed.
2
Touch [DVB-T].
The DVB-T screen is displayed.
3
Perform the desired operation.
Channel Number UP/Down or Favourite Channel Number
Up/Down
Touch [CH.]* to select changing the Channel or the Favourite
Channel.
Touch CH. [ ] or
[ ] to move the Channel number Up/Down.
Touch FA
V [ ] or [ ] to move the Favourite Channel number
Up/Down.
* The button displays the current changing mode ([CH
.] or [FAV]).
Calling up Main Menu Screen
Touch [MENU] to call up the main menu screen.
Calling up Menu Operation Mode
Touch [MENU CONT] to call up the menu operation mode.
Switching the Source
Touch [A/V].
The source switches with each touch.
Calling up Electronic Programme Guide (EPG)
Touch [EPG] to call up the Electronic Programme Guide.
Scanning Mode
1
Touch [P1/3].
The function guide appears.
2
Touch [SCAN] to start the auto scan procedure.
• For detail, refer to the Owner’s Manual of the TUE-T200DVB sold
separately.
Video Menu Operation of TUE-T200DVB
1
Touch [P1/3] twice.
The direct touch mode screen is displayed.
• W
hen the optional TUE-T200DVB is connected, you can control it by
the touch key (except the [Control] key) on the display screen of the
unit.
2
Touch [Control].
Return to DVB-T main screen.
• I
f no operation is performed for 5 seconds, the screen will
automatically switch to the full screen mode.
Controlling CD Changer (Optional)
An optional 6-disc or 12-disc CD Changer may be connected to the
INA-W910R if it is Ai-NET compatible. With a CD Changer connected
to the Ai-NET input of the INA-W910R, the CD Changer will be
controllable from the INA-W910R.
If you connect a changer compatible with MP3, you can play
CD-ROMs, CD-Rs, and CD-RWs containing MP3 files on the
INA-W910R.
Using the KCA-410C (Versatile Link Terminal) multiple changers can
b
e controlled by the INA-W910R.
See the Multi-Changer Selection section for selecting the CD Changers
(
explained on page 72).
1
Press SOURCE/ on the unit.
The Source Select screen is displayed.
2
Touch [CD CHG].
The display changes to the CD changer mode screen.
When a 6 Disc CD Changer is connected;
1 Touch [P1/2]*.
The Function Guide display appears.
* When an MP3 compatible CD changer or DVD changer is
c
onnected, touch repeatedly until the disc number is displayed.
2 Touch any one of the select buttons [D
ISC 1] through
[DISC 6].
DISC 1 through DISC 6 select the discs from the first disc
to
6th disc.
When an MP3 compatible CD changer is connected;
1 Touch [P1/3] twice to change the Function Guide display.
2 Touch any one of the select buttons [D
ISC 1] through
[DISC 6].
DISC 1 through DISC 6 select the discs from the first disc
to
6th disc.
When a 12-Disc CD Changer is connected;
You can select the disc numbers 1 to 6 in the same manner as
fo
r 6-disc Changer.
Touch [P1/3] twice to select disc numbers 7 to 12.
The function guide display changes so that DISC 7 through
DIS
C 12 represent disc numbers 7 to 12.
• Af
ter selecting the desired disc, you can operate in the same way as
for the CD player. For details, see the CD/MP3/WMA/AAC section.
• W
hen an MP3 compatible CD changer is connected, the unit can
play discs containing both audio data and MP3 data.
• T
he DVD changer (optional) is controllable from the INA-W910R as
well as the CD changer.
• F
or operation of the connected DVD changer (DHA-S690), refer to
the section “CD/MP3/WMA/AAC” or “DVD/Video CD” described
in this manual, or the Owner’s Manual of the DHA-S690.
• When the optional DVD changer (DHA-S690) is connected to this
unit, touching [NTSC/PAL] after touching [P1/4] three times will
change the video input.
TUE-T200DVB
Operation (Optional)
Changer
(Optional)
To Next Page
Loading...
