Alpine INE-W970A - Phone; Pairing and Connecting a Phone; When no Phones Have Been Paired; When a Phone Is Already Paired

52 -EN
Phone
Pairing and Connecting a Phone
When no Phones Have Been Paired

Press the All Menus button
→
touch [Phone].
Or in the Home screen, touch [All Menus]
→
[Phone].

Touch [Yes].

Pair from the Bluetooth Device
From the Bluetooth device, search for the car name and pair
the device. When searching from the Bluetooth device, the
car name is ‘INE-W970A’ and the default passkey is ‘0000’.
When a Phone is Already Paired

Press the All Menus button
→
touch [Phone].
Or in the Home screen, touch [All Menus]
→
[Phone].

Select the device from the list and touch
[Connect].
• When a Bluetooth device is connected, a new device cannot
be paired. If you want to pair a new phone, first disconnect the
connected Bluetooth device.
When your phone is connected

Press the All Menus button
→
touch [Phone].
Or in the Home screen, touch [All Menus]
→
[Phone].
The following screen will be displayed.
• Once Bluetooth connection is successful, the name of the
connected mobile phone will be displayed on the phone screen
and Bluetooth handsfree functions will be ready to be operated.
• Some functions may not be supported due to limited Bluetooth
compatibility between the car system and mobile phone.
ALPINE_OM_AU_ENG_191023.indd 52 2019-10-23 오후 8:58:21