Alpine INE-W970A - Sound Settings; Setting Tone;Fader;Balance; Setting Subwoofer

64 -EN
Sound Settings
This menu is used to adjust the sound effects for the whole system.

In the Setup screen, touch [Sounds].
Setting Tone/Fader/Balance

In the Sounds Settings screen, touch
[Tone/Fader/Balance].

Use the +, -,
▲
,
▼
,
◀
,
▶
and buttons to adjust
settings.
Touch to restore sound to the centre position.
Setting Subwoofer

Check the [Off] box to turn subwoofer feature on.

Adjust the subwoofer level and phase using
[< , >].
• The Subwoofer Lever and Phase features are unavailable when
the Subwoofer feature is turned off.
• The subwoofer level can be set from 0 to 15.
• The subwoofer output phase is toggled Subwoofer Normal (0°) or
Subwoofer Reverse (180°).
ALPINE_OM_AU_ENG_191023.indd 64 2019-10-23 오후 8:58:32