Alpine INE-W970A - Setting AUX Name; Using Remote Control; Setting Signal; HDMI Settings

75 -EN
Setting AUX Name

In the AUX Settings screen, touch [AUX Name].

Select the desired name.
AUX / AUX DVD / GAME / External DVD / DVD Changer /
DVB-T / TV / USB Player
Using Remote Control

Check the [AVN] box to turn the feature on.

Uncheck the [RSE] box to turn the feature off.
• AVN: AUX is operated through the remote controller signal from
the Remote Sensor.
• RSE: AUX is operated using the remote controller signal delivered
from the device connected with the RSE.
Setting Signal
You can switch the visual input signal system.
Select the desired option.
• Auto: the video input signal type (NTSC or PAL) will be
automatically selected.
• NTSC/PAL: choose the video input signal type manually.
HDMI Settings
You can set the name of an external device connected via HDMI.

In the Setup screen, touch [HDMI].

Select the desired name.
• HDMI: set when a smartphone is connected via HDMI.
• DVD: set when an external DVD player is connected.
• This setting cannot be changed while the HDMI source is being
selected.
ALPINE_OM_AU_ENG_191023.indd 75 2019-10-23 오후 8:58:39