EasyManua.ls Logo

Alpine KCE-635UB - Precautions; Safety Information

Alpine KCE-635UB
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-EN
PRECAUTIONS
Temperature
Be sure the temperature inside the vehicle is between +45C
(+113F) and 0C (+32F) before turning your unit on.
Fuse Replacement
When replacing the fuse(s), the replacement must be of the
same amperage as shown on the fuse holder. If the fuse(s)
blows more than once, carefully check all electrical connections
for shorted circuitry. Also have your vehicle’s voltage regulator
checked.
Maintenance
If you have problems, do not attempt to repair the unit yourself.
Return it to your Alpine dealer or the nearest Alpine Service
Station for servicing.
Installation Location
Make sure the KCE-635UB will not be exposed to:
Direct sun and heat
High humidity
Excessive dust
Excessive vibrations
SAFETY
Video Output (front)
In order to ensure vehicle safety, the driver side screen must be
connected to the front video output connector.
This will ensure the driver won’t be able to watch video while
the vehicle is moving, if the yellow/blue handbrake wire is
properly connected. The driver will be able to watch video once
the handbrake is pulled. The rear passenger screens, connected
to the rear video output connectors, do not fall under this
restriction.
EN
WARNING

Other manuals for Alpine KCE-635UB