Alpine MRV-V500 - Bridged Connection Guide; Bridging for 2 Speaker + Subwoofer; Bridging Tips and Proper Wiring

13-EN
BRIDGED CONNECTIONS
2 Speaker + 1 Subwoofer System
Input Channel Selector Switch Setting
3/4 SUB W.
CH-3/4 SUB W.
Fig. 13
Important Tips on Bridging an Amplifier
NOTE:
• Low output will result if only one channel input is used. The Y-adapter is not required if a stereo/mono pair
line output is used to drive both inputs of the bridged amp.
Proper connection
One signal One signal
Fig. 14
Improper connection