Alpine MRV-V500 - Product Specifications; Performance Specifications; Control and General Specs

14-EN
SPECIFICATIONS
MRV-V500
CH-1/2/3/4 SUB W.
Performance
Power Output
Per Channel, Ref.: 4 Ω, 14.4 V 40 W RMS x 4 150 W RMS x 1
Per Channel, Ref.: 2 Ω, 14.4 V 60 W RMS x 4 250 W RMS x 1
Bridged, Ref.: 4 Ω, 14.4 V 120 W RMS x 2 –
THD+N
Ref.: 10 W into 4 Ω ≤0.02% ≤0.02%
Ref.: 10 W into 2 Ω ≤0.03% ≤0.03%
Ref.: Rated Power into 4 Ω ≤0.07% ≤0.07%
Ref.: Rated Power into 2 Ω ≤0.09% ≤0.09%
S/N Ratio
IHF A-wtd + AES-17
Ref.: 1W into 4 Ω
>81 dB >81 dB
IHF A-wtd + AES-17
Ref.: Rated Power into 4 Ω
>98 dB >104 dB
Frequency Response
+0/-3 dB, Ref.: 1 W into 4 Ω 10 Hz - 45 kHz 10 Hz - 400 Hz
+0/-1 dB, Ref.: 1 W into 4 Ω 20 Hz - 20 kHz 20 Hz - 300 Hz
Damping Factor Ref.: 10 W into 4 Ω at 100 Hz >90 >500
Control
Input Select
Selectable Input Signal
Configuration (2ch/4ch/6ch Input)
CH-3/4:
CH-1/2 or CH-3/4
CH-1+2+3+4
or SUB W.
Input Sensitivity
RCA Input
Ref.: Rated Power into 4 Ω
0.2 - 4.0 V 0.2 - 4.0 V
Crossover Variable HPF/LPF
HPF: 50 Hz - 400 Hz
(-12 dB/oct.)
LPF: 50 Hz - 400 Hz
(-24 dB/oct.)
Equalizer Bass EQ (fc=50 Hz) –
0 to +12 dB
(Variable)
Remote Level

Linear Attenuation
 Requires optional RUX-KNOB
– 0 to -20 dB
General
Input Impedance >10 kΩ
Dimensions
Width 244.5 mm (9-3/4”)
Height 55 mm (2-1/4”)
Depth 219 mm (8-5/8”)
Weight 2.57 kg (5 lb 11 oz)
NOTE:
• Specifications and design are subject to change without notice.