Alpine WCT202 - Assembly and Usage Instructions

4
ASSEMBLING & USING YOUR PRODUCT
Unpack all components carefully. Check the packaging to ensure all of
the parts have been removed.
*Some splashing may occur when the fountain is in use.
1. Place the Fountain Base on a smooth and level surface.
2. Remove the Submersible Pump from its packaging. Move the
switch on the pump to the right to adjust the water ow to lowest
setting to avoid splashing during assembly. You can adjust the
water ow at any time.
Alpine Quick Tip #1
Move switch to the Left
to turn up the water
ow or to the Right turn
down the water ow.