62-EN
This unit provides FM Linking function which can switch the source
from DAB+/DMB to FM radio when the digital signal is weak.
Setting item: FM Linking
Setting contents: Off (Initial setting) / On
You can choose whether to supply power to DAB Antenna Connector
by this setting. Confirm the type of DAB Antenna (sold separately)
before installing the DAB antenna. If an active antenna that needs power
supply from this unit is used, set DAB Antenna Power to On; if a
passive antenna that does not need power supply from this unit is used,
make sure to set DAB Antenna Power to Off, otherwise, a malfunction
may occur.
Setting item: DAB Antenna Power
Setting contents: Off (Initial setting) / On
AUX Setting
[AUX] is selected on the Source setup menu in step 3. Refer to “Source
Setup Operation” (page 58).
Setting item: AUX In
Setting contents: Off / On (Initial setting)
When AUX In is set to “ON”, this setting is available.
Setting item: Primary Name
Setting contents: AUX1 (Initial setting) / DVD / GAME / EXT.DVD /
DVD-CHG / DVB-T / TV / USB Player
• When a DVB-T tuner or USB Player (sold separately) is connected,
you can use it to connect one more External Input device. Setting the
Secondary name can change the mode name display of this device.
Setting the Secondary AUX Name
Secondary name can be set only when Primary name is set to “DVB-T”
or “USB Player”.
Setting item: Secondary Name
Setting contents: OFF (Initial setting) / AUX2 / DVD / GAME /
EXT.DVD / DVD-CHG / DVB-T*
1
/ TV / USB
Player*
2
*
1
If the Primary Name is DVB-T, DVB-T is not displayed as a
Secondary Name option.
*
2
If the Primary Name is USB Player, USB Player is not displayed as a
Secondary Name option.
• The selected source name is displayed instead of AUX mode name.
Setting Direct Touch Operation
If DVB-T is set as the Primary Name or Secondary Name, this setting is
available.
Setting item: Direct Touch
Setting contents: On (Initial setting) / Off
Switching the Visual Input Signal System
After setting to “On” in “Setting the AUX Mode”, this setting can be
carried out. The video input type can be changed.
Setting item: Signal
Setting contents: Auto (Initial setting) / NTSC/PAL
Connection with external input devices is available through the iPod
VIDEO connector. An optional adapter cable is required (standard RCA
to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini phono plug).
You can also play back video connecting with an optional AV cable
(4-pole mini AV plug to 3-RCA).
Setting item: AUX3 In Sel.
Setting contents: iPod Video (Initial setting) / AUX3
Setting the FM Linking ON/OFF
(Service Following)
Off: Keep receiving the digital signal, even when
the digital signal is weak.
On: If the digital signal is weak, this unit will switch
to receive the analog FM radio signal
automatically. At switching, the selected
source button changes to [Radio FM Linking].
You cannot continue listening to analog FM
radio if you touch [Radio FM Linking].
When the digital signal is available again, it
will return to receive digital signal.
Setting the DAB Antenna ON/OFF
Off: When no DAB Antenna is connected or the
connected DAB Antenna does not need
power supply from this unit.
On: When the connected DAB Antenna needs
power supply from this unit.
Setting the AUX Mode
Off: AUX source is not displayed.
On: AUX source is displayed.
Setting the Primary AUX Name
(AUX Setup)
On: Direct Touch operation is available on the DVB-T screen.
Off: Direct Touch operation is not available on the DVB-T
screen.
Auto: The video input signal type (NTSC or PAL) will
be automatically selected.
NTSC/PAL: Choose the video input signal type manually.
Setting the AUX3
iPod Video: Set when connected to an iPod or iPhone.
AUX3: Set when connected to an external input device.
To Next Page
Loading...
