Installation
Filling with SF
6
gas
P32--0001EN/03
7/8
07--2012
© ALSTOM 2010. All rights reserved. Information contained in this document is indicative only. No representation or warranty is given or should be
relied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It is
provided without liability and is subject to change without notice. Reproduction, use or disclosure to third parties, without express written authority, is
strictly prohibited.
GRID
Humidity of gaz SF
6
gas in t h e circuit breaker
Principl e
This measurement is not necessary, as the equipment has enough
molecular sieves to provide a dewpoint ≤ 0°C for an ambient temperature
of 20°C, for an apparatus filled at its nominal pressure for 2 to 3 months.
To Next Page
Loading...
