Installation
Fitting the power supply terminals
with preparation of the contact surfaces
P31--5001EN/02
1/4
01--2011
© ALSTOM 2010. All rights reserved. Information contained in this document is indicative only. No representation or warranty is given or should be
relied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It is
provided without liability and is subject to change without notice. Reproduction, use or disclosure to third parties, without express written authority, is
strictly prohibited.
GRID
Presentation
Required
products and
accessories
List of ALSTOM Grid products and accessories necessary for the operation :
Reference
ALSTOM
Grid
Illustration Description
--01861262 ISOPROPANOL can (1l)
--01835106 Vaseline 204--9
--01835118 Contactal grease
--01831320 A400 sandpaper
--02212334 Wiping cloth
--02211842 Round paintbrush n°4
--02211831 Flat paintbrush n°16
Document required
have a diagram of the apparatus to know the orientation of the power supply
terminals.
In this module
This module covers the following subjects:
Subject Page
Preparing the contact surfaces 2
Fitting the power supply terminals 3
To Next Page
Loading...
Need help?
General
