4. Connect with Cloud-Based Controller – AltaiCare
Network Scenario:
1. You can manage your IX500 and set up hotspot service for the subscribers
with AltaiCare, which is a cloud-based system.
2. Go to Configuration > Network > General. Select Switch Mode for Network
Setting and make sure the IX500 can reach Internet and communicate
with AltaiCare by inputting valid IP settings either via DHCP or with Static IP
configuration. Google Public DNS Server can be considered, e.g. 8.8.8.8 or
8.8.4.4 if you are not sure about the ISP DNS’s Server IP.
To Next Page
Loading...
