Need help?Do you have a question about the ALTAI A2C and is the answer not in the manual?
General| Frequency Band | 2.4 GHz, 5 GHz |
|---|---|
| Antenna Gain | 5 dBi |
| Power Consumption | 12W |
| Ethernet Ports | 2 x 10/100/1000 Mbps |
| Dimensions | 175 x 120 x 35 mm |
| Wireless Standard | 802.11a/b/g/n/ac |
| Operating Temperature | -20°C to +55°C |
| Antenna Type | Internal Omni |
Configuring radio parameters like mode, channel, and transmit power.
Setting up the wireless network name (SSID) and security.
Setting the wireless network name (SSID) and enabling the WLAN.
Configuring security protocols like WPA2-PSK and AES.
Setting the device to operate as a gateway or router.
Configuring dynamic IP settings via DHCP or PPPoE.
Note that A2c should operate in Switch Mode for AltaiCare support.
Ensuring A2c can reach Internet and AltaiCare via IP settings.
Configuring management type and connection type for AltaiCare.
Choosing between Full Management or Monitor Mode based on AP mode.
To Next Page
