EasyManua.ls Logo

ALTAI A2N User Manual

Default Icon
121 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Altai Technologies Ltd. All rights reserved
ALTAI A2N WIFI ACCESS POINT/BRIDGE
WEB-ADMIN
CONFIGURATION
MANUAL
Version 1.0
Date: September, 2013

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the ALTAI A2N and is the answer not in the manual?

ALTAI A2N Specifications

General IconGeneral
Frequency Band2.4 GHz
Wireless StandardsIEEE 802.11b/g/n
Wi-Fi Standards802.11b/g/n
Operating Temperature60°C
Ethernet Ports1 x 10/100 Base-T
Wireless ModeAccess Point
Antenna TypeIntegrated
SecurityWPA, WPA2

Summary

3. Getting Started

3.1. Setup Local Area Connection on Your PC

Guide to establishing a local area network connection between your PC and the A2n Access Point.

3.3. Configuration with Web-Admin

Accessing and logging into the A2n Access Point's web-based administration interface for configuration.

4. System Status

5. System Configuration

5.2.2.Network Configuration

Configuring network parameters like switch/gateway mode, IP settings, and VLANs for the A2n.

5.3. Wireless

Covers the setup and configuration of wireless networks for both 2.4GHz and 5GHz radios.

6. Administration Configuration

6.5. Firmware Update

Step-by-step guide for updating the A2n device's firmware to the latest version.

6.6. Restore Factory Default

Procedures for resetting the A2n device to its original factory default configuration.

6.7. Backup/Restore

Creating backups of the A2n configuration and restoring from saved configuration files.

7. System Tools

Related product manuals