ALTAI A2N - 6.6. Restore Factory Default

Altai Technologies Ltd. All rights reserved
Altai A2n WiFi Access Point/Bridge Web-Admin Configuration Manual
TPS13-001_rev1.0
Figure 6-11 Information after firmware update
6.6. Restore Factory Default
There are 2 ways to reset the system back to factory default settings.
 Via user interfaces (eg. SSH/Console/Web)
 Via hardware reset button
6.6.1. Reset back to factory default via user interfaces
Under Administration -> Factory Default, user can reset the A2n back to Factory
Default Configuration.
Figure 6-12 Restore to Factory Default
Procedures:
1. Reset to Factory Default：Press this button to reset A2n to Factory Default
Configuration.