Need help?Do you have a question about the ALTAI IX500 and is the answer not in the manual?
General| Frequency Bands | 2.4 GHz, 5 GHz |
|---|---|
| Power over Ethernet (PoE) | 802.3af/at |
| Ingress Protection | IP67 |
| Model | IX500 |
| Type | Wireless Access Point |
| Operating Modes | Access Point, Bridge, WDS |
| Wireless Standards | IEEE 802.11a/b/g/n/ac |
| Ethernet Ports | 1 x 10/100/1000 Mbps |
| Power Source | PoE |
Provides an overview of the ALTAI IX500 product and the purpose of the guide.
Lists the main IX500 unit, ceiling mount bases, dry wall mount kit, and indoor back cover.
Details the optional wall/pole mount kit and the back cover for outdoor installation.
Explains the meaning of different LED states for power and radio activity.
Describes the Ethernet port, DC power jack, and the dual-function reset button (reboot/factory reset).
Instructions for installing the AP using T-rail ceiling mount bases.
Guide for mounting the AP onto a concrete wall.
Steps to mount the AP onto a pole using cable ties.
Lists required hardware, software, and network components for initial setup.
Illustrates connecting the AP to power and network via PoE switch.
Procedure for configuring computer's TCP/IP settings for AP connection.
How to access the AP's web interface using default username and password.
Enabling wireless radios and setting the device to AP mode.
Configuring the wireless network name (SSID) and security parameters.
Steps to configure network settings for communication with AltaiCare.
Enabling and setting up remote management via AltaiCare.
Information regarding FCC (USA) and CE (EU) compliance and exposure limits.
Includes warnings about power adapters and a disclaimer about document accuracy and changes.
To Next Page
