3. Click Remote Mgmt and check the box of Enable Remote Management.
Select AltaiCare as Management Type and Cloud as Connection Type.
4. Select Full Management if the device is running in AP Mode. For Station
Mode, Bridge Mode and Repeater Mode, select Monitor Mode instead.
5. Click Submit and then Save & Apply at the top right corner to make all the
changes take effect.
6. Follow AltaiCare Quick Start Guide and register the IX500 in the system for
AP management and user service and admission control.
7. IX500 will appear as online in AltaiCare AP list if the connection is
successful.
To Next Page
Loading...
