Altana BYK Automatchic Vision - Setup; Device Info

30
9 Setup
To enter the setup menu click on the settings icon.
Therstscreenappearswithaccesstodeviceinfo
and WLAN settings.
To move to other setup parameters use the
„forward“ and „backward“ arrows.
9.1 Device Info
This menu displays the following information about
the device:
• CatalogNo.
• SerialNo.
• FirmwareVersion
To proceed click on the „forward“ arrow, to go back,
click on the „backward“ arrow.
• Dateoflastcalibration
• Dateoflastgreencheck
• Conguration
• Lastservice
• Batterystatus
Setup


