Setup
9.3 Auto measure
The instrument can be setup to execute a reading
by just pressing the three pins.
The new status is indicated in the display:
Click again on the icon to reverse the status.
9.4 Beeper
This menu option turns the beeper on or off. Click
on the icon to turn the beeper on.
The new status is indicated in the display:
Click again on the icon to reverse the status.
9.5 Display background
This menu option switches the background of
the display from light to dark. Click on the icon to
switch the display to light.
The new status is indicated in the display:
Click again on the icon to reverse the status.
9.6 Rotate display
This menu option rotates the display for right / left
handed operation.
The new status is indicated in the display:
Click again on the icon to reverse the status.
To Next Page
Loading...
