Altana BYK Automatchic Vision - Language; Run Diagnosis

33
Setup
9.7 Language
To chose a different language, click on the
language symbol. A selection menu appears,
containing all languages which are available in the
instrument.
Click on the desired language to select it and then
clickonthecheckmarktoconrmthechoice.
9.8 Run Diagnosis
Click on the diagnosis symbol and the instrument
carriesoutaselfdiagnosis.Ifnoerrorisdetected
DiagnosticO.K.
isdisplayed.Incaseofanerror,
Diagnostic check failed
is displayed.
Please refer to Errors and Warning Messages in
chapter 13.

