Altech DSR 4639 - 4 Installing and Connecting the Pvr; Oop through Connection: ( Important )

11 | P a g e
© Copyright 2012 Altech UEC (Pty) Ltd
4 INSTALLING AND CONNECTING THE PVR
4.1 LOOP THROUGH CONNECTION: ( IMPORTANT )
4.1.1 Connect the Loop through F-F connector on LNB1 out to LNB 2
in –see the below picture
WITHOUT THIS LOOPED CONNECTION THE PVR WILL
NOT FUNCTION.
FOR ASSISTANCE EMAIL - SUPPORT@UEC.COM.AU