23 | P a g e
© Copyright 2012 Altech UEC (Pty) Ltd
12.3 CHANGE MENU SETTINGS
12.3.1 Up the up down keys to move the highlight to the different options
12.3.2 Press the right arrow to move to the sub menu
12.3.3 Use the up and down arrow keys to move through the sub menu
12.3.4 Highlight the correct option and press OK to edit it
12.3.5 Use the left and right keys to select options, or if required, use the number keys
to type in new values.
12.4 DISH INSTALLATION MENU
This is where the set top box is configured according to your satellite options. In most cases,
no changes are required to this menu. However, if an old LNB is used then most likely the
LNB frequency value should be set to 11300. (11300 is the most common alternate
frequency, but this frequency value is dependent on the LNB used)
To Next Page
Loading...
